I am selling an RME Hammerfall DSP Mutiface 1.
This sound card it is a really fantastic solution for music recording,
I've been used this items for three years and it's never gave any problems.
For any enquiry do not hesitate to contact me.

Package Contents each of the following:
PCI Interface:
・ PCI card HDSP
・ Quick Info guide
・ RME Driver CD
・ Cable IEEE1394, 4.5 m (15 ft)
・ Internal cable (3 pin)
CardBus Interface:
・ CardBus card
・ Quick Info guide
・ RME Driver CD
・ Cable CardBus to IEEE1394, 4.5 m (15 ft)
・ 12 V car cable
・ Battery cable
・ Power supply 12 V / 1.25 A and power cord
Multiface:
・ I/O-box Multiface
・ Quick Info guide
・ RME Driver CD
・ 1 optical cable (TOSLINK), 2 m (6.6 ft)

Below you will find all the specification:



Hammerfall design: 0% (zero!) CPU load, even using all 36 ASIO channels
・ All settings can be changed in real-time
・ Enhanced mixed mode: ADAT In, S/PDIF In, and all outputs can be used simultaneously
・ 8 available buffer sizes/latencies: 1.5 / 3 / 6 / 12 / 23 / 46 / 93 / 186 ms
・ Sample Split technology for 4 channel, 96 kHz/24-bit record/playback via ADAT optical
・ Slave and master clock modes
・ Automatic and intelligent master/slave clock control
・ Unsurpassed Bitclock PLL (audio synchronization) in ADAT mode
・ Word clock input and output
・ ADAT Sync in (9-pin D-type) for sample-accurate transfer
・ Zero Latency Monitoring: Hardware bypass per track, controlled by Punch in/out
・ Enhanced ZLM for latency-free submixes and perfect ASIO Direct Monitoring
・ SyncAlign guarantees sample aligned and never swapping channels
・ SyncCheck tests and reports the synchronization status of input signals
・ 1 x MIDI I/O, 16 channels high-speed MIDI
・ 1 x Analog Line/headphone output, separate output for independent submix
・ DIGICheck DSP: Level meter in hardware, peak- and RMS calculation
・ TotalMix: 720 channel mixer with 40 bit internal resolution
5. Technical Specifications
5.1 Digital
・ Super Low Jitter Design: < 3 ns word clock PLL, < 2 ns ADAT PLL, < 1 ns internal
・ Internal sample rates: 32 / 44.1 / 48 / 88.2 / 96 kHz
・ Supported sample rats through word clock: 27 kHz - 103 kHz
・ Internal resolution: 24 Bit
・ Input PLL ensures zero dropout, even at more than 40 ns jitter
・ Bitclock PLL for trouble-free varispeed operation in ADAT mode
・ High-sensitivity input stage (< 0.2 Vss input level)
・ Output voltage 0.8V (consumer mode, phono) or 2.3V (professional mode)
・ Phono input and output ground-free transformer coupled
・ Connectors: optical (TOSLINK), phono, BNC
・ Clocks: ADAT Sync In, word clock I/O
・ Formats: SPDIF (Consumer and Professional), ADAT optical
5.2 Analog
Stereo Monitor Output
・ Analog output level: +8 dBu @ 0 dBFS
・ Dynamic range: 108 dB (RMS unweighted, unmuted), 112 dBA
・ THD+N: -100 dB / 0.001%
・ Frequency response DA, -0.1 dB: 20 Hz - 20.8 kHz (sf 44,1 kHz)
・ Frequency response DA, -0.5 dB: 10 Hz - 44 kHz (sf 96 kHz)
・ Sample rates playback: 32 / 44.1 / 48 / 64 / 88.2 / 96 kHz and variable (word clock)
・ Ouput impedance: 75 Ohm
・ Channel separation: > 110 dB
AD
・ Resolution AD: 24 Bit
・ Signal to Noise ratio: 101 dB RMS unweighted, 106 dBA
・ THD: < -107 dB, < 0.00045 %
・ THD+N: < -96 dB, < 0.0016 %
・ Crosstalk: > 120 dB
・ Analog headroom prior to AD conversion: 13 dB
・ Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz - 20.7 kHz
・ Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz - 32 kHz
・ Input Line: 1/4" TRS jack, servo balanced
・ Input impedance Line: > 5 kOhm
・ Input sensitivity through jumper: Lo Gain, +4 dBu, -10 dBV
・ Input level for 0 dBFS @ Lo Gain: +19 dBu
・ Input level for 0 dBFS @ +4 dBu: +13 dBu
・ Input level for 0 dBFS @ -10 dBV: +2 dBV
DA
・ Resolution DA: 24 Bit
・ Signal to Noise ratio: 108 dB RMS unweighted, 111 dBA (unmuted)
・ THD: < - 98 dB, < 0.0013 %
・ THD+N: < -91 dB, < 0.002 %
・ Crosstalk: > 100 dB
・ Maximum output level DA: +19 dBu
・ Frequency response DA @ 44.1 kHz, -0.5 dB: 5 Hz ? 20.9 kHz
・ Frequency response DA @ 96 kHz, -0.5 dB: 5 Hz - 35 kHz
・ Output Line: 1/4" TRS jack, servo balanced
・ Output impedance Line: 47 Ohm
・ Output level through jumper: Hi Gain, +4 dBu, -10 dBV
・ Output level at 0 dBFS @ Hi Gain: +19 dBu
・ Output level at 0 dBFS @ +4 dBu: +13 dBu
・ Output level at 0 dBFS @ -10 dBV: +2 dBV
5.3 Transfer Modes: Resolution / Bits per Sample
ASIO:
・ 24 or 32 bit, 4 byte (stereo 8 byte)
This format is compatible with 16-bit and 20-bit. Resolutions below 24-bit are handled by the
audio application.
MME:
・ 16 bit, 2 byte (stereo 4 byte)
・ 20 bit, 3 byte MSB (stereo 6 byte)
・ 20 bit, 4 byte MSB (stereo 8 byte)
・ 24 bit, 3 byte (stereo 6 byte)
・ 24 bit, 4 byte MSB (stereo 8 byte)
・ 32 bit, 4 byte (stereo 8 byte)
Channel Interleave operation is limited to single speed operation and 16 bit.




Kind Regards



Godam

Package inluded of Cables+ Cardbus + PCI